 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|||||||||||||
|
There are many ways to fabricate acrylic. Many types of raw materials. Some are poor quality, some good and of course some are excellent. It’s difficult to see from pictures the quality of construction, so we would like to give you a closer look at some of the techniques we use to produce a superior product. Please take a look below... |
|||||||||||||
 |
|||||||||||||
|
Every Flange on every Protein Skimmer, Calcium Reactor, Kalkreactor and Waste Collector we produce... Every bottom on every cylinder gets a socket connection (just like pvc pipe) like the one shown in this picture of our Kalkreactor. There is a groove that the acrylic tubing fits inside giving more glue surface, hence a much stronger joint. More lateral support and a more rugged product. All models 4” in diamter and up, get a 3/8” or 1/2” thick bottom/base. Look for even more detailed images soon. |
|||||||||||||
|
Made in U.S.A. |
|||||||||||||
|
Copyright 2006 - Precision Marine Systems, Inc. - All Rights Reserved |
|||||||||||||
|
|
 |