Bulkhead Wrenches 50% Off

Offer expires midnight tonight. Use coupon code "Christmas2016"

Our famous bulkhead are wrenches are on-sale. Deep discounts! The best bulkhead wrenches in the business.

Manufactured since 2004, Precision Marine Bulkhead wrenches are designed to work with most Bulkhead Fittings and definitely fit the fittings we distribute. Machined from solid ½" PVC, these tools are extremely versatile.

The wrenches are normally used for, but are not limited to new installations. Popularly used for those that need to replace a fitting that has failed or to simply tighten a nut that has loosened. Obviously the plumbing will need to be removed first.

Available in 5 Sizes ½", ¾", 1", 1½" & 2"

 

Offer expires midnight tonight. Use coupon code "Christmas2016"

  • They can be cut down for tight spaces
  • You can add more pipe to make them longer
  • Add a tee or an elbow for leverage
  • Get a set for every installer's toolbox
  • By extending the PVC with a coupling, you can Install bulkhead fittings in tall overflow boxes by yourself!

Fits Most Bulkheads - Not guaranteed to fit all bulkhead nuts.

Available in:

  • ½", ¾, 1", 1½" & 2"

Free Pump Chamber Lids!

Limited Time Offer - Free Pump Chamber Lid!

When you order our acclaimed R48 or R48 Pro Plus - Pro Series sump receive a FREE custom pump chamber lid

The Pro Series utilize the Precision Marine Quiet-Flow system to route incoming water from the tank into an isolated chamber to capture and control any turbulence and direct that gentle flow of water into the micron bags for 100% mechanical filtration

Same Day Shipping when ordered by 11am CST

What Separates Precision Marine from the Competition

~ The Pro Series Difference ~

ALL ¼” Thick Domestic Cell-Cast Acrylic Construction

We do not use .177 or .220 Acrylic on dividers or any other parts!

⅜” Thick Custom Machined, Acrylic Micron Bag Bracket - Micron Bags Sit Flush in Bracket

Heavy-Duty ½” Thick Polypropylene Lid Over Micron bags

USA Made Micron Bags

Optional ½” Thick Polypropylene Pump Chamber Cover

Key Features

  • Premium, optical-grade, cast acrylic construction throughout. NEVER and cost-cutting extruded acrylic 
  • ¼" thick acrylic used on EVERY piece. NO cost-cutting .220 or thinner material as seen on our competitors
  • White baffles block light and prevent undesirable algae growth in other chambers.
  • Single or Dual - 100 or 200 micron bags for mechanical filtration
  • ½” heavy weight, high density polyethylene lid over micron bags provides easy access to micron bags
  • ⅜” thick, heavy-duty micron bags bracket w/precision-machined openings for micron bag flange
  • Dual or Triple Drains
  • Final mechanical sponge chamber with sponge
  • 4 or 5 space tubing holders for dosing or top-off
  • Full top provides bracing on all sides
  • 3D Slotted/Grooves for a perfect sheet of water & to strain any algae from refugium section to protect water pump.
  • Magnetic probe-holder option gives you the ability to place your probes exactly where you want them.
  • Large Protein Skimmer Section

We do not use .177 or .220 Acrylic Anywhere!

Experience the PM Difference!

R30 PRO | R36 PRO | R48 PRO | R48 PRO PLUS | BIO 36 PRO PLUS | BIO 48 PRO

  • The adjustable water level gimmick: We have never found a respectable skimmer that doesn't perform properly in 8" of water. Nor too high or too low. So, why pay for it? With a Precision Marine sump you're getting better quality, thicker acrylic, finer machining and attention to detail for the same cost.
  • The probe holder gimmick: Users of electrodes or probes should have the ability of placing them where they want. That being said, magnetic probe holders give you the flexibility of locating the holder where you want, and they're cheap! Another "feature" you're paying for.
  • The “Platforms for media” gimmick:  Let's face it, filter media is best used in a media reactor where 100% of the water is exposed to that media, regardless of the type of filter material (Bio-Pellets, GFO, Activated Carbon, Nitrate Removing Media, etc). Most types of filter media only perform as intended when it’s fluidized (moving in the reactor). And besides those points.... who doesn't use a media reactor these days?

Lastly, these are refugiums we’re talking about… why mechanically filter out the very organisms that are being cultivated in live rock and sand (in your refugium)? It doesn’t make sense. The sponge included in our sumps are used as a last resort if your skimmer creates uncontrollable bubbles. The 3D grooves in our dividers (bordering the refugium and bubble trap) will protect the return pump from debris. Why pay for this “feature”?

 

Bulkhead Wrenches - 20% Off All Sizes

Sale Ends Sunday 10/30/2016

Our famous bulkhead are wrenches are on-sale. Deep discounts! 20% off the best bulkhead wrenches in the business.

Used for new installations, replacing a bulkhead or to simply tighten a nut that has loosened.

A must for every installer!

Available in: ½", ¾", 1", 1½" & 2

At checkout use Coupon Code "20OFF"

Click here to see Bulkhead Wrenches

Manufactured since 2004, Precision Marine Bulkhead Fittings are designed to work with most Bulkhead Fittings and definitely fit the fittings we distribute. Machined from solid ½" PVC, these tools are extremely versatile.

  • They can be cut down for tight spaces
  • You can add more pipe to make them longer
  • Add a tee or an elbow for leverage
  • Get a set for every installer's toolbox!
  • 10" Long
By extending the PVC with a coupling, you can Install bulkhead fittings in tall overflow boxes by yourself!

Fits Most Bulkheads - Not guaranteed to fit all bulkhead nuts.

Bulkhead Wrenches - 20% Off Sale

Used for new installations, replacing a bulkhead fitting that has failed, associated plumbing that is leaking or to simply tighten a nut that has loosened.

Available in: ½", ¾", 1", 1½" & 2

At checkout use Coupon Code "20OFF"

Click here to see Bulkhead Wrenches

 

Manufactured since 2004, Precision Marine Bulkhead wrenches are designed to work with most Bulkhead Fittings and definitely fit the fittings we distribute. Machined from solid ½" PVC, these tools are extremely versatile.

  • They can be cut down for tight spaces
  • You can add more pipe to make them longer
  • Add a tee or an elbow for leverage
  • Get a set for every installer's toolbox!
  • 10" Long
By extending the PVC with a coupling, you can Install bulkhead fittings in tall overflow boxes by yourself!

Fits Most Bulkheads - Not guaranteed to fit all bulkhead nuts.

R48 PRO-PLUS - 70 GALLONS!

Everything you love about the R48 PRO, "PLUS" an additional 4 inches of width. Holding a net volume of 70 gallons, now there are two reasons to choose a high capacity, "off-the-shelf," Precision Marine Pro Series sump. Custom specs rather than a custom build which can expensive very quickly.

  • New dosing line stays correspond with holders which are integrated in the fully trimmed top and line up beautifully. Perfectly straight every time! Standard on all Pro Series Sumps!
  • Integrated 1" emergency overflow now comes standard on the R48 PRO & PRO PLUS.
  • Optional pump chamber lid features ½" thick, heavy weight, machined polypropylene. A 20 thousandths of an inch clearance for a tight fit.
  • Custom features that appear on the off-the-shelf Pro Series line. These new features start today!

Shipping Tuesday 4/26

What Separates Precision Marine from the Competition

~ The Pro Series Difference ~

ALL ¼” Thick Domestic Cell-Cast Acrylic Construction
We do not use .177 or .220 Acrylic on dividers or any other parts!
⅜” Thick Custom Machined, Acrylic Micron Bag Bracket - Micron Bags Sit Flush in Bracket
Heavy-Duty ½” Thick Polypropylene Lid Over Micron bags
USA Made Micron Bags
Optional ½” Thick Polypropylene Pump Chamber Cover

What people are saying...

I have set up numerous types of refugiums. To be honest, Precision Marine has been the best made out there! Never had a leak. There's no salt creep formation on the new PRO series and the quality is top of the line material. I'm not just saying that cuz I order from them. I have tried different refugiums but they don't compare. For example the Trigger systems refugium and the quality is not as good as Precision Marine. They make my job harder. All it is is a pretty shell.

Posted by Jason Giannas on Friday, March 25, 2016

Just placed order for new custom sump and possibly new ATO. Excellent experience dealing with Mike. Extremely professional, knows exactly what he is doing which takes the guessing game out and more importantly has great communication, which I found in this hobby to be extremely, extremly poor. Kudos to Mike and team, can't wait to get this setup for the 500G that's on the way.
Thanks Mike!

Posted by Juan Nunez on Tuesday, March 15, 2016

Experienced wonderful customer service from precision marine. I look forward to doing business with them again, and I cannot wait to install my new equipment.

Posted by Johnny Vegas on Monday, March 7, 2016

48 x 24 x 15 | 70g Net Volume

Coming April 26!!!

Pro Series Gets an Update!

  • New dosing line stays correspond with holders which are integrated in the fully trimmed top and line up beautifully. Perfectly straight every time! Standard on all Pro Series Sumps!
  • Integrated 1" emergency overflow now comes standard on the R48 PRO.
  • Optional pump chamber lid features ½" thick, heavy weight, machined polypropylene. A 20 thousandths of an inch clearance for a tight fit.
  • Custom features that appear on the off-the-shelf Pro Series line. These new features start today!

R48 Pro Officially Released

The all-new 2016 R48 Pro is the best off the shelf sump on the market without going to a custom build. Heavy gauge, optical grade, cell-cast acrylic for years of service.

Key Features Include:

  • Premium, optical-grade, cast acrylic construction throughout. NEVER and cost-cutting extruded acrylic 
  • ¼" thick acrylic used on EVERY piece. NO cost-cutting .220 or thinner material as seen on many others
  • 8" Constant Water Level for perfect skimmer control
  • White baffles block light and prevent undesirable algae growth in other chambers.
  • Single or Dual - 100 micron bags for mechanical filtration
  • ½” high density polypropylene lid over micron bags provides easy access to micron bags
  • ⅜” thick, heavy-duty micron bag bracket w/precision-machined openings for micron bag flange
  • Dual 1½” Bulkhead fittings
  • Final custom-fitted mechanical sponge chamber with sponge
  • 5 space tubing holders for dosing or top-off
  • Fully trimmed top provides bracing on all sides
  • 3D Slotted/Grooves for a perfect sheet of water & to strain any algae from refugium section to protect water pump
  • Magnetic probe-holder option gives you the ability to place your probes exactly where you want them.
  • Ample protein skimmer section

We do not use .177 or .220 Acrylic on any parts like nearly all of the others.

 

 

 

New for 2016

Hello Precision Marine customers and enthusiasts. We have some new items for 2016 and more to come! Check out our "New for 2016 Page".

You'll find Fluorescent Coral Pointers, Coral Viewers, All-New ST-3 & ST-4 Skimmer Stands, Bulk Coral Glue and the Pro Series Replacement Sponges.

The All-New R48 PRO Series Refugium/Sumps are now available. They are 48"x 20"x 15" and have a net volume of 58+ gallons. Check with your local dealer or contact us directly for a dealer referral.

Our Pro Series ATO's have been a huge success. We encourage you to take a close look at them. Particularly when paired with any of the Pro Series Refugiums, this is a very handsome & functional set up....not to mention first-class all the way!




Precision Marine Pro Series Officially Released!

Two new models with more models to come. 


The Pro Series utilize the Precision Marine Quiet-Flow system to route aquarium water into the reservoir and over the micron bags. This is accomplished by using a baffle to isolate the water, control any turbulence and then direct that gentle flow of water into the micron bags. 

Being a protein skimmer manufacturer for over 18 years, we understand the importance of a large area for a robust skimmer. Take a look at each of the models specifications to be sure your skimmer will fit. Don’t hesitate contacting us for advice on which skimmer to get.

  • All premium, optical grade cast acrylic construction
  • White baffles block light and prevent undesirable algae growth in other chambers.
  • Single, dual or triple - 200 micron bags for mechanical filtration
  • ½” high density polyethylenelid over micron bags provides easy access to micron bags
  • ⅜” thick, heavy-duty micron bags bracket w/precision-machined openings for micron bag flange
  • Single, dual or triple drains
  • Final mechanical sponge chamber with sponge
  • 5 space tubing holders for dosing or top-off
  • Full top provides bracing on all sides
  • Slotted/Grooves to strain any algae from refugium section to protect water pump.
  • ROBUST SKIMMER CHAMBER